Runs

01:56 Rules and game-play No Comments

The primary concern of the batsman on strike (i.e., the "striker") is to prevent the ball hitting the wicket and secondarily to score runs by hitting the ball with his bat so that he and his partner have time to run from one end of the pitch to the other before the fielding side can return the ball. To register a run, both runners must touch the ground behind the crease with either their bats or their bodies (the batsmen carry their bats as they run). Each completed run increments the score.
More than one run can be scored from a single hit; but, while hits worth one to three runs are common, the size of the field is such that it is usually difficult to run four or more. To compensate for this, hits that reach the boundary of the field are automatically awarded four runs if the ball touches the ground en route to the boundary or six runs if the ball clears the boundary on the full. The batsmen do not need to run if the ball reaches or crosses the boundary.

Hits for five are unusual and generally rely on the help of "overthrows" by a fielder returning the ball. If an odd number of runs is scored by the striker, the two batsmen have changed ends, and the one who was non-striker is now the striker. Only the striker can score individual runs, but all runs are added to the team's total.
The decision to attempt a run is ideally made by the batsman who has the better view of the ball's progress, and this is communicated by calling: "yes", "no" and "wait" are often heard.
Running is a calculated risk because if a fielder breaks the wicket with the ball while the nearest batsman is out of his ground (i.e., he does not have part of his body or bat in contact with the ground behind the popping crease), the batsman is run out.
A team's score is reported in terms of the number of runs scored and the number of batsmen that have been dismissed. For example, if five batsmen are out and the team has scored 224 runs, they are said to have scored 224 for the loss of 5 wickets (commonly shortened to "224 for five" and written 224/5 or, in Australia, "five for 224" and 5/224).

Extras

1.No ball: a penalty of one extra that is conceded by the bowler if he breaks the rules of bowling either by (a) using an inappropriate arm action; (b) overstepping the popping crease; (c) having a foot outside the return crease. In addition, the bowler has to re-bowl the ball. In limited overs matches, a no ball is called if the bowling team's field setting fails to comply with the restrictions. In shorter formats of the game (20–20, ODI) the free hit rule has been introduced. The ball following a front foot no-ball will be a free-hit for the batsman, whereby he is safe from losing his wicket except for being run-out.
2.Wide: a penalty of one extra that is conceded by the bowler if he bowls so that the ball is out of the batsman's reach; as with a no ball, a wide must be re-bowled.
3.Bye: extra(s) awarded if the batsman misses the ball and it goes past the wicketkeeper to give the batsmen time to run in the conventional way (note that one mark of a good wicketkeeper is one who restricts the tally of byes to a minimum).
4.Leg bye: extra(s) awarded if the ball hits the batsman's body, but not his bat, while attempting a legitimate shot, and it goes away from the fielders to give the batsmen time to run in the conventional way.
When the bowler has bowled a no ball or a wide, his team incurs an additional penalty because that ball (i.e., delivery) has to be bowled again and hence the batting side has the opportunity to score more runs from this extra ball. The batsmen have to run (i.e., unless the ball goes to the boundary for four) to claim byes and leg byes but these only count towards the team total, not to the striker's individual total for which runs must be scored off the bat.

Read More

Batting

01:52 Rules and game-play No Comments

At any one time, there are two batsmen in the playing area. One takes station at the striker's end to defend the wicket as above and to score runs if possible. His partner, the non-striker, is at the end where the bowler is operating.
Batsmen come in to bat in a batting order, decided by the team captain. The first two batsmen – the "openers" – usually face the hostile bowling from fresh fast bowlers with a new ball. The top batting positions are usually given to the most competent batsmen in the team, and the non-batsmen typically bat last. The pre-announced batting order is not mandatory and when a wicket falls any player who has not yet batted may be sent in next.
If a batsman "retires" (usually due to injury) and cannot return, he is actually "not out" and his retirement does not count as a dismissal, though in effect he has been dismissed because his innings is over. Substitute batsmen are not allowed.
A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". Batsmen do not always seek to hit the ball as hard as possible, and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run.
There is a wide variety of shots played in cricket. The batsman's repertoire includes strokes named according to the style of swing and the direction aimed: e.g., "cut", "drive", "hook", "pull".
Note that a batsman does not have to play a shot and can "leave" the ball to go through to the wicketkeeper, providing he thinks it will not hit his wicket. Equally, he does not have to attempt a run when he hits the ball with his bat. He can deliberately use his leg to block the ball and thereby "pad it away" but this is risky because of the leg before wicket rule.
In the event of an injured batsman being fit to bat but not to run, the umpires and the fielding captain may allow another member of the batting side to be a runner. The runner's only task is to run between the wickets instead of the injured batsman. The runner is required to wear and carry exactly the same equipment as the incapacitated batsman. It is possible for both batsmen to have runners.

Read More

Bowling

01:46 Rules and game-play No Comments

The bowler reaches his delivery stride by means of a "run-up", although some bowlers with a very slow delivery take no more than a couple of steps before bowling. A fast bowler needs momentum and takes quite a long run-up, running very fast as he does so.
The fastest bowlers can deliver the ball at a speed of over 90 miles per hour (140 km/h) and they sometimes rely on sheer speed to try and defeat the batsman, who is forced to react very quickly. Other fast bowlers rely on a mixture of speed and guile. Some fast bowlers make use of the seam of the ball so that it "curves" or "swings" in flight. This type of delivery can deceive a batsman into mistiming his shot so that the ball touches the edge of the bat and can then be "caught behind" by the wicketkeeper or a slip fielder.

At the other end of the bowling scale is the "spinner" who bowls at a relatively slow pace and relies entirely on guile to deceive the batsman. A spinner will often "buy his wicket" by "tossing one up" (in a slower, higher parabolic path) to lure the batsman into making a poor shot. The batsman has to be very wary of such deliveries as they are often "flighted" or spun so that the ball will not behave quite as he expects and he could be "trapped" into getting himself out.
In between the pacemen and the spinners are the "medium pacers" who rely on persistent accuracy to try and contain the rate of scoring and wear down the batsman's concentration.
All bowlers are classified according to their looks or style. The classifications, as with much cricket terminology, can be very confusing. Hence, a bowler could be classified as LF, meaning he is a left arm fast bowler; or as LBG, meaning he is a right arm spin bowler who bowls deliveries that are called a "leg break" and a "Googly".
During the bowling action the elbow may be held at any angle and may bend further, but may not straighten out. If the elbow straightens illegally then the square-leg umpire may call no-ball: this is known as "throwing" or "chucking", and can be difficult to detect. The current laws allow a bowler to straighten his arm 15 degrees or less.

Read More

Umpires and scorers

01:43 Rules and game-play No Comments

The game on the field is regulated by two umpires, one of whom stands behind the wicket at the bowler's end, the other in a position called "square leg", a position 15–20 metres to the side of the "on strike" batsman. When the bowler delivers the ball, the umpire at the wicket is between the bowler and the non-striker. The umpires confer if there is doubt about playing conditions and can postpone the match by taking the players off the field if necessary, for example rain or deterioration of the light.


An umpire
Off the field and in televised matches, there is often a third umpire who can make decisions on certain incidents with the aid of video evidence. The third umpire is mandatory under the playing conditions for Test matches and limited overs internationals played between two ICC full members. These matches also have a match referee whose job is to ensure that play is within the Laws of cricket and the spirit of the game.
Off the field, the match details including runs and dismissals are recorded by two official scorers, one representing each team. The scorers are directed by the hand signals of an umpire. For example, the umpire raises a forefinger to signal that the batsman is out (has been dismissed); he raises both arms above his head if the batsman has hit the ball for six runs. The scorers are required by the Laws of cricket to record all runs scored, wickets taken and overs bowled. In practice, they accumulate much additional data such as bowling analyses and run rates.
Innings
The innings (ending with 's' in both singular and plural form) is the term used for the collective performance of the batting side. In theory, all eleven members of the batting side take a turn to bat but, for various reasons, an innings can end before they all do so.
Depending on the type of match being played, each team has one or two innings apiece. The term "innings" is also sometimes used to describe an individual batsman's contribution ("he played a fine innings").
The main aim of the bowler, supported by his fielders, is to dismiss the batsman. A batsman when dismissed is said to be "out" and that means he must leave the field of play and be replaced by the next batsman on his team. When ten batsmen have been dismissed (i.e., are out), then the whole team is dismissed and the innings is over. The last batsman, the one who has not been dismissed, is not allowed to continue alone as there must always be two batsmen "in". This batsman is termed "not out".
An innings can end early for three reasons: because the batting side's captain has chosen to "declare" the innings closed (which is a tactical decision), or because the batting side has achieved its target and won the game, or because the game has ended prematurely due to bad weather or running out of time. In each of these cases the team's innings ends with two "not out" batsmen, unless the innings is declared closed at the fall of a wicket and the next batsman has not joined in the play.
In limited overs cricket, there might be two batsmen still "not out" when the last of the allotted overs has been bowled.
Overs

The bowler bowls the ball in sets of six deliveries (or "balls") and each set of six balls is called an over. This name came about because the umpire calls "Over!" when six balls have been bowled. At this point, another bowler is deployed at the other end, and the fielding side changes ends while the batsmen do not. A bowler cannot bowl two successive overs, although a bowler can bowl unchanged at the same end for several overs. The batsmen do not change ends and so the one who was non-striker is now the striker and vice-versa. The umpires also change positions so that the one who was at square leg now stands behind the wicket at the non-striker's end and vice-versa.
Team structure
A team consists of eleven players. Depending on his or her primary skills, a player may be classified as a specialist batsman or bowler. A well-balanced team usually has five or six specialist batsmen and four or five specialist bowlers. Teams nearly always include a specialist wicket-keeper because of the importance of this fielding position. Each team is headed by a captain who is responsible for making tactical decisions such as determining the batting order, the placement of fielders and the rotation of bowlers.
A player who excels in both batting and bowling is known as an all-rounder. One who excels as a batsman and wicket-keeper is known as a "wicket-keeper/batsman", sometimes regarded as a type of all-rounder. True all-rounders are rare as most players focus on either batting or bowling skills.

Read More

Bat and ball

01:40 Rules and game-play 1 Comment

The essence of the sport is that a bowler delivers the ball from his end of the pitch towards the batsman who, armed with a bat is "on strike" at the other end.
The bat is made of wood (usually White Willow) and has the shape of a blade topped by a cylindrical handle. The blade must not be more than 4.25 inches (108 mm) wide and the total length of the bat not more than 38 inches (970 mm).

The ball is a hard leather-seamed spheroid with a circumference of 9 inches (230 mm). The hardness of the ball, which can be delivered at speeds of more than 90 miles per hour (140 km/h), is a matter for concern and batsmen wear protective clothing including pads (designed to protect the knees and shins), batting gloves for the hands, a helmet for the head and a box inside the trousers (to protect the crotch area). Some batsmen wear additional padding inside their shirts and trousers such as thigh pads, arm pads, rib protectors and shoulder pads.

Read More

Pitch, wickets and creases

01:36 Rules and game-play No Comments

At either end of the pitch, 22 yards (20 m) apart, are placed the wickets. These serve as a target for the bowling (aka fielding) side and are defended by the batting side which seeks to accumulate runs. The pitch is 22 yards (20 m) or one chain in length between the wickets and is 10 feet (3.0 m) wide. It is a flat surface and has very short grass that tends to be worn away as the game progresses. The "condition" of the pitch has a significant bearing on the match and team tactics are always determined with the state of the pitch, both current and anticipated, as a deciding factor.
Each wicket consists of three wooden stumps placed in a straight line and surmounted by two wooden crosspieces called bails; the total height of the wicket including bails is 28.5 inches (720 mm) and the combined width of the three stumps is 9 inches (230 mm).

Four lines, known as creases, are painted onto the pitch around the wicket areas to define the batsman's "safe territory" and to determine the limit of the bowler's approach. These are called the "popping" (or batting) crease, the bowling crease and two "return" creases.


A wicket consists of three stumps that are hammered into the ground, and topped with two bails.
The stumps are placed in line on the bowling creases and so these must be 22 yards (20 m) apart. A bowling crease is 8 feet 8 inches (2.64 m) long with the middle stump placed dead centre. The popping crease has the same length, is parallel to the bowling crease and is 4 feet (1.2 m) in front of the wicket. The return creases are perpendicular to the other two; they are adjoined to the ends of the popping crease and are drawn through the ends of the bowling crease to a length of at least 8 feet (2.4 m).
When bowling the ball, the bowler's back foot in his "delivery stride" must land within the two return creases while his front foot must land on or behind the popping crease. If the bowler breaks this rule, the umpire calls "No ball".
The importance of the popping crease to the batsman is that it marks the limit of his safe territory for he can be stumped or run out (see Dismissals below) if the wicket is broken while he is "out of his ground".

Read More

Summary

01:34 Rules and game-play No Comments

A cricket match is played between two teams of eleven players each on a grassy field, typically 137–150 metres (150–160 yd) in diameter. The Laws of Cricket do not specify the size or shape of the field but it is often oval.

A cricket match is divided into periods called innings. During an innings (innings ends with 's' in both singular and plural form), one team fields and the other bats. The two teams switch between fielding and batting after each innings. All eleven members of the fielding team take the field, but only two members of the batting team (two batsmen) are on the field at any given time.

The key action takes place in the pitch, a rectangular strip in the centre of the field. The two batsmen face each other at opposite ends of the pitch, each behind a line on the pitch known as a crease. The fielding team's eleven members stand outside the pitch, spread out across the field.

Behind each batsman is a target called a wicket. One designated member of the fielding team, called the bowler, is given a ball, and attempts to send (bowl) the ball from one end of the pitch to the wicket behind the batsman on the other side of the pitch. The batsman tries to prevent the ball from hitting the wicket by striking the ball with a bat. If the bowler succeeds in hitting the wicket, or if the ball, after being struck by the batsman, is caught by the fielding team before it touches the ground, the batsman is dismissed. A dismissed batsman must leave the field, to be replaced by another batsman from the batting team.

If the batsman is successful in striking the ball and the ball is not caught before it hits the ground, the two batsmen may then try to score points (runs) for their team by running across the pitch, grounding their bats behind each other's crease. Each crossing and grounding by both batsmen is worth one run. The batsmen may attempt multiple runs or elect not to run at all. By attempting runs, the batsmen risk dismissal, which can happen if the fielding team retrieves the ball and hits a wicket with the ball before either batsman reaches the opposite crease.

If the batsman hits the bowled ball over the field boundary without the ball touching the field, the batting team scores six runs and may not attempt more. If the ball touches the ground and then reaches the boundary, the batting team scores four runs and may not attempt more. When the batsmen have finished attempting their runs, the ball is returned to the bowler to be bowled again. The bowler continues to bowl toward the same wicket, regardless of any switch of the batsmen's positions.

After a bowler has bowled six times (an over), another member of the fielding team is designated as the new bowler. The new bowler bowls to the opposite wicket, and play continues. Fielding team members may bowl multiple times during an innings, but may not bowl two overs in succession.

The innings is complete when 10 of the 11 members of the batting team have been dismissed, one always remaining "not out", or when a set number of overs has been played. The number of innings and the number of overs per innings vary depending on the match.

Read More

History

01:18 No Comments

Early cricket was at some time or another described as "a club striking a ball (like) the ancient games of club-ball, stool-ball, trap-ball, stob-ball". Cricket can definitely be traced back to Tudor times in early 16th-century England. Written evidence exists of a game known as creag being played by Prince Edward, the son of Edward I (Longshanks), at Newenden, Kent in 1301 and there has been speculation, but no evidence, that this was a form of cricket.
A number of other words have been suggested as sources for the term "cricket". In the earliest definite reference to the sport in 1598, it is called creckett. Given the strong medieval trade connections between south-east England and the County of Flanders when the latter belonged to the Duchy of Burgundy, the name may have been derived from the Middle Dutch[6] krick(-e), meaning a stick (crook); or the Old English cricc or cryce meaning a crutch or staff. In Old French, the word criquet seems to have meant a kind of club or stick. In Samuel Johnson's Dictionary, he derived cricket from "cryce, Saxon, a stick". Another possible source is the Middle Dutch word krickstoel, meaning a long low stool used for kneeling in church and which resembled the long low wicket with two stumps used in early cricket. According to Heiner Gillmeister, a European language expert of Bonn University, "cricket" derives from the Middle Dutch phrase for hockey, met de (krik ket)sen (i.e., "with the stick chase"). Dr Gillmeister believes that not only the name but the sport itself is of Flemish origin.


The first English touring team on board ship at Liverpool in 1859
The earliest definite reference to cricket being played in England (and hence anywhere) is in evidence given at a 1598 court case which mentions that "creckett" was played on common land in Guildford, Surrey, around 1550. The court in Guildford heard on Monday, 17 January 1597 (Julian date, equating to the year 1598 in the Gregorian calendar) from a 59 year-old coroner, John Derrick, who gave witness that when he was a scholar at the "Free School at Guildford", fifty years earlier, "hee and diverse of his fellows did runne and play [on the common land] at creckett and other plaies." It is believed that it was originally a children's game but references around 1610 indicate that adults had started playing it and the earliest reference to inter-parish or village cricket occurs soon afterwards. In 1624, a player called Jasper Vinall was killed when he was struck on the head during a match between two parish teams in Sussex.
During the 17th century, numerous references indicate the growth of cricket in the south-east of England. By the end of the century, it had become an organised activity being played for high stakes and it is believed that the first professionals appeared in the years following the Restoration in 1660. A newspaper report survives of "a great cricket match" with eleven players a side that was played for high stakes in Sussex in 1697 and this is the earliest known reference to a cricket match of such importance.
The game underwent major development in the 18th century and became the national sport of England. Betting played a major part in that development with rich patrons forming their own "select XIs". Cricket was prominent in London as early as 1707 and large crowds flocked to matches on the Artillery Ground in Finsbury. The single wicket form of the sport attracted huge crowds and wagers to match. Bowling evolved around 1760 when bowlers began to pitch the ball instead of rolling or skimming it towards the batsman. This caused a revolution in bat design because, to deal with the bouncing ball, it was necessary to introduce the modern straight bat in place of the old "hockey stick" shape. The Hambledon Club was founded in the 1760s and, for the next 20 years until the formation of MCC and the opening of Lord's Old Ground in 1787, Hambledon was both the game's greatest club and its focal point. MCC quickly became the sport's premier club and the custodian of the Laws of Cricket. New Laws introduced in the latter part of the 18th century included the three stump wicket and leg before wicket (lbw).


Don Bradman had a Test average of 99.94 and an overall first-class average of 95.14, records unmatched by any other player.
The 19th century saw underarm bowling replaced by first roundarm and then overarm bowling. Both developments were controversial. Organisation of the game at county level led to the creation of the county clubs, starting with Sussex CCC in 1839, which ultimately formed the official County Championship in 1890. Meanwhile, the British Empire had been instrumental in spreading the game overseas and by the middle of the 19th century it had become well established in India, North America, the Caribbean, South Africa, Australia and New Zealand. In 1844, the first international cricket match took place between the United States and Canada (although neither has ever been ranked as a Test-playing nation).
In 1859, a team of England players went on the first overseas tour (to North America). The first Australian team to tour overseas was a team of Aboriginal stockmen who travelled to England in 1868 to play matches against county teams. In 1862, an English team made the first tour of Australia and in 1876–77, an England team took part in the first-ever Test match at the Melbourne Cricket Ground against Australia.
W.G. Grace started his long career in 1865; his career is often said to have revolutionised the sport. The rivalry between England and Australia gave birth to The Ashes in 1882 and this has remained Test cricket's most famous contest. Test cricket began to expand in 1888–89 when South Africa played England. The last two decades before the First World War have been called the "Golden Age of cricket". It is a nostalgic name prompted by the collective sense of loss resulting from the war, but the period did produce some great players and memorable matches, especially as organised competition at county and Test level developed.
The inter-war years were dominated by one player: Australia's Don Bradman, statistically the greatest batsman of all time. It was the determination of the England team to overcome his skill that brought about the infamous Bodyline series in 1932–33, particularly from the accurate short-pitched bowling of Harold Larwood. Test cricket continued to expand during the 20th century with the addition of the West Indies, India, and New Zealand before the Second World War and then Pakistan, Sri Lanka, and Bangladesh in the post-war period. However, South Africa was banned from international cricket from 1970 to 1992 because of its government's apartheid policy.
Cricket entered a new era in 1963 when English counties introduced the limited overs variant. As it was sure to produce a result, limited overs cricket was lucrative and the number of matches increased. The first Limited Overs International was played in 1971. The governing International Cricket Council (ICC) saw its potential and staged the first limited overs Cricket World Cup in 1975. In the 21st century, a new limited overs form, Twenty20, has made an immediate impact.

Read More

Cricket

00:55 No Comments

Cricket is a bat-and-ball game played between two teams of 11 players on a field, at the centre of which is a rectangular 22-yard long pitch. One team bats, trying to score as many runs as possible while the other team bowls and fields, trying to dismiss the batsmen and thus limit the runs scored by the batting team. A run is scored by the striking batsman hitting the ball with his bat, running to the opposite end of the pitch and touching the crease there without being dismissed. The teams switch between batting and fielding at the end of an innings.
In professional cricket the length of a game ranges from 20 overs of six bowling deliveries per side to Test cricket played over five days. The Laws of Cricket are maintained by the International Cricket Council (ICC) and the Marylebone Cricket Club (MCC) with additional Standard Playing Conditions for Test matches and One Day Internationals.
Cricket was first played in southern England in the 16th century. By the end of the 18th century, it had developed into the national sport of England. The expansion of the British Empire led to cricket being played overseas and by the mid-19th century the first international matches were being held. The ICC, the game's governing body, has ten full members. The game is played particularly in Australasia, the Indian subcontinent, the West Indies, Southern Africa and England.

Read More